Post Thumb

Operating principle of heat transfer oil boiler

release time: 2019-05-20 11:04:21 page view: 1004

The operator of the electric heating heat transfer oil boiler shall be trained in the knowledge of electric heating and heat transfer oil furnace, and shall be certified by the local boiler safety supervision organization. Insulation measures shall be taken for pipes within the range of electrically heated heat transfer oil boilers, but coating measures shall not be adopted at flange joints.

The unit used for electric heating and heat transfer oil boilers must formulate operating procedures for electric heating and heat transfer oil furnaces. The operating procedures shall include the operation methods and precautions for starting, running, stopping the furnace, and emergency shutdown of the electric heating heat transfer oil furnace. The operator must operate according to the operating procedures.


The organic heat carrier in use should be analyzed for its residual carbon, acid value, viscosity and flash point every year. When there are two unqualified analyses or the content of the heat carrier decomposition component exceeds 10%, the heat carrier or heat carrier should be replaced. Regenerate.

After installation or major repair of the electric heating heat transfer oil boiler, the hydraulic test of 1.5 times the working pressure shall be carried out by the use unit and the installation or repair unit before putting into operation, and the gas tightness test shall be carried out for the gas phase furnace. Only after passing the test can it be put into operation. When the hydraulic test and the airtight test are conducted, the local boiler safety supervision agency shall send personnel to participate.

Like what you see? Contact us for details.